Messages posted by: Ismail (IV08007401)

Since the inception of the Industrial Revolution, storming advancements made in the field of automobiles, automatic gates and automatic gate repair have contributed a lot in the convenience, comfort and the feeling of security of mankind. However, a breakthrough in security apparatus came when automatic gates were introduced in 1954. These sliding and swinging door were equipped with electronic mechanism which enable them to sense approaching traffic or movement and diminish the need to pull open the door to gain entry.

But as mentioned earlier, it is a machine and just like any other machine available on the face of the earth, it faces frequent wear and tear and thus, require constant maintenance and repair. Automatic gate repair is not that complex and can be done just as you take care of any other door. But the difference lies in the usage of devices and expert knowledge of the machine.

Most of automatic doors detect approaching traffic with the help of infrared rays or remote sensing. Some other gates follow the command of a switch and offer power assisted entry. Thus, it is advisable to call an expert from the company which installed the door. But in the case of their unavailability, there are hundreds of other companies which can cater to your automatic door repair needs in an effective and efficient manner.

Let us begin our discussion with the cost factor. Broadly speaking, the cost of an automatic gate repair depends upon a number of factors such as the quality of the service offered by the company, the level of problem, transportation cost that some companies might add to the final bill, time spend on the door and other similar things. Thus, overall repairing can cost you near about $600 to $650 including service charge which can be around $200 and the cost of the equipments (if any used) around $400 to $450. You should not forget that unlike eggs, milk and newspaper, repairing don't have fixed charges. Thus, it is always advisable to look for price quotes. You can also bargain before the commencement of the process but don't compromise quality to save few bucks.

In an automatic gate, most of the problems occur in the detecting device. Now, everybody is well aware that a detecting device detect the approaching individuals or traffic. Repairing can be done in two ways. If a delicate part of the machine is damaged, it might be repaired on the spot within a few minutes. However, if a motion detector or a pressure sensor is affected, the repairing might take a lot of time and cost you little extra money.

Before calling an automatic Photo Eye Gates Sensors Repair Service
, don't forget to check if he is capable of offering services for all the top brands available in the market. They should be able to deliver new equipments and should have everything needed to fix the Gate Repair Company . They should be able to replace or repair the broken springs, wires, sensors, drums and hinges. It will be much better if the company offers time bound warranty for their repairing services. Check out their website and go through all the testimonials. You can also ask your neighbours, friends and colleagues regarding the best automatic door repairing service available in the city.

Ideally speaking, everybody prefer to work with a single company when it comes to automatic gate repair needs. You should not call one person for electrical issue, another for glass replacement and a third one for structural issues. It is better to find an expert team belonging to one company which could deal with all the issues.

Another important factor is the speed. Nobody wants to hire a company whose worker don't even bother to show up on proper time. Adding to this, it will at least a day to fix the problem. It means by calling an unprofessional team, you will waste no less than three to four days. Thus, it is better to find someone who could come to your house that very day and fix the problem as early as possible.

Military Spouses make great sacrifices to be a spouse and support our soldiers. Because of that, the military has established programs to try to help ease the burden. Tuition Assistance programs are available for military spouses to continue their education without all the financial pressures that come with paying for it. This post is designed to share some of the opportunities available to us.

Although every program is different from one another however, they have similar goals. The intended goal is to provide each spouse member with economic help so that they can have good opportunities for career through education.

If you're a Military Spouse or connected with one, this post is for you:

Financial support for Marine and Navy Corps spouses program:
STAP the Navy's Spouse Tuition Aid Program offers both Maine and Navy spouses who are living abroad with their military member they are granted with the facility i.e. up to 50% of discount on the tuition for education programs. Moreover, it has a limit of 300 dollars per term plus does not exceed 1500 dollars per year. There is no need to attend classes for full day.

Navy Marine Corps Relief Society Administered covers full graduate program at high per term rate/per-year at the max.

The Air Force has their edition of Navy's Spouse Tuition Aid Program. While alike to the Marine /Navy program, because it has a limit of $1500 per academic year. It has a dissimilar twist. Its main aim is to provide partial tuition help through granting up to 50 percentages of the charges for tuition.

· Army Tuition Assistance program:

As the Army has 2 spouse's assistance program for QE Boys tutors . Where one is for the spouse's member who is stationed abroad and another one for those in the state. It totally depends on your need, the Overseas Spouse Education Assistance Program (OSEAP) funded education should be finished whilst the spouse is living abroad with her or his military member. Overseas Spouse Education Assistance Program always gives half of the tuition fee i.e. up to $540 per term or $2700 per year.

The Stateside Spouse Education Assistance Program (SEAP) is just like OSEAP program because it also depends on your need. The dissimilarity, nevertheless, is that it is only available to the spouses who are:

1. Soldiers who died on duty.

2. Retired soldiers.

3. Active duty personnel stationed stateside.

4. Retired soldiers who have died.

Both programs are administered by AER (Army Emergency Relief) plus cover vocational training programs or undergraduate. Army Emergency Relief has consolidated the SEAP and OSEAP starting with the 2012-2013 school year. You can read more about the consolidation here.

Military Spouse Career Advancement Account (MyCAA):
This program is funded by the Department of Defense (DoD), and offers QE Boys tutors assistance for a military spouse pursuing a career - usually in education, business administration & health services, since these jobs are generally found at just about every military installation. Active duty spouses could apply for an award $3,000 for two year of college.

At this point in our states water shortage we all should be asking ourselves, "How can I help conserve water?". Thankfully, technological advances in regular household items are giving us the ability to conserve water and energy in our daily routines. Everything from weather smart irrigation control systems to water efficient appliances are allowing us to take control over our water consumption to do our part in conserving a precious resource.

Significant advancements in artificial grass manufacturing have helped pave the way for a broadening interest in the use of artificial grass. Artificial grass has proven to be a key tool in reducing household water consumption of which, on average, 60% goes to irrigating landscape.

The use of artificial grass has never made more sense. We are in a situation where water reservoirs and snow pack are at record lows and water bills are at record highs, artificial grass is a solution for both issues. Installing an artificial grass lawn can reduce your water bill by up to 70% (or more if you have a LOT of grass).

Most Southern California residents are generally aware of the current drought conditions in California. What most of us do not realize are the dire consequences these conditions are having in certain areas. In San Diego, Orange County, Los Angeles and Riverside County we have felt recent rate hikes from our local water authorities and we've seen the push for water conservation. These are mild consequences compared to the effects it is having on some other counties across the state.

As of December 2009, these conditions are causing major economic drawbacks in areas such as Fresno County, where a large portion of the labor force is tied to agriculture. This has overwhelmed social services programs and has strained state agencies' ability to respond quickly, resulting in high unemployment rates and food shortages. Also effecting water allocations are the new court-mandated restrictions recently placed on the Central Valley Project (CVP) water diversions through the Delta to protect the Delta Smelt. This has led to a 20 - 30% decrease in Delta diversions. CVP water deliveries west of the San Joaquin Valley are currently at 10% of contractors allocations. This time in 2008 and 2007 they were at 40 and 50 percent, respectively.

These points only touch the surface of the issues that face California's water supply. 2010 is expected to be another dry year as statewide water reservoirs are already at just 65% of average. The years between 2006 - 2009 was the 12th driest three year period on record since the state state started keeping hydrological records. The same three year period also marks a time of unprecedented water restrictions across the state.

Panjia, Inc. is southern California's premier installation service provider for artificial grass, putting greens, paving stones and landscape. Panjia has a determined focus on customer satisfaction that goes beyond the expectation of just delivering a beautiful home improvement project. Panjia is also focused on creating sustainable outdoor living environments for our clients that will not only be durable and built to last, but also use products and live goods that wont be a strain on the environment and natural resources. From artificial grass installers San Diego , drought tolerant shrubs, plants, and trees, to water efficient irrigation systems, Panjia will expertly design and craft your home improvement project to your satisfaction guaranteed.

It is easy to view water as an infinite resource. It makes up over 70% of our planet's surface, and, in developed countries at least, it comes freely out of our faucets. But the reality is that water conservation is becoming more and more pivotal, as easily tapped sources are becoming less viable, and burgeoning populations, especially in dry areas like Southern California or New Mexico, are putting a greater strain on our water supply.

What can we do to bring water awareness to our lawns and gardens? Try implementing some of the following water saving ideas.

1) Garden Locally

The majority of plants you use for landscaping should be native to the area. This insures that they are acclimated to your seasons. Tending to plants during a California drought generally requires frequent watering; plant the drought resistant Arabian Lilac and it will thrive with minimal care. Do a little research, find some local varieties, and enjoy a low maintenance garden.

2) Savvy Sprinklers

It is a common sight to see a sprinkler system that is copiously watering the pavement, the sidewalk, and sometimes passing pedestrians. Center your sprinklers so that they are proving water to your lawn only - if the circumference of your sprinkler is too large, buy a smaller sprinkler. Also, try to find a sprinkler that sprays out more than up, and use them only in the evening or early morning - it is easy for a large quantity of water to be lost to evaporation.

3) Reduce

Buy water saving attachments for your hose, and don't leave it running; learn about your plants individual hydration needs and only water when necessary. Over-watering is a more common killer of garden plants then under-watering.

4) Reuse & Recycle

A few ideas:

-water from washing vegetables or rinsing cooked pasta, and from steamed or boiled veggies, can be thrown into the garden.

-wash pets, cars, and driveways so that the runoff can hydrate your lawn or garden (with environmentally-friendly soap).

-when you are waiting for the shower water to warm up, catch it in a bucket and then water your plants with it.

-keep an eye out for additional ways to reuse!

5) Conserve

Hold on to the Buy Water Saving Shower Timer Online USAyou've got. Mulching prevents evaporation, and inhibits weeds (which are often more efficient at water uptake than other plants). Make sure your garden beds are as level as possible so that the water doesn't pool on one side, or drain away entirely. When Shower Timers for sale USA with a hose, focus your spray around the roots of the individual plants instead of doing a general sweep of the garden bed.

An engagement ring is not just a piece of jewelry, it is also a promise. A promise that you want to be with her and only her for the rest of your life. Engagement rings for women are sold all over, so how do you pick the best one for your woman?

First, you should know your woman's taste in jewelry. She might like small diamonds, big diamonds, gold, or even white gold. Once you know what her taste in jewelry is you will be able to find the best engagement ring for her. Second, you need to know what type of material you want your future wife's engagement ring to be. White gold engagement rings are both elegant and beautiful. These rings are unique because they are gold, but they also look like they are silver. White gold engagement rings are great for women who like to wear unique types of jewelry.

Third, find out what ring size your loved one is. you will have to be sneaky while doing this because you do not want her to suspect what you are doing. Look in her jewelry box while she is at work, or ask her for the ring she wears all the time. Tell her that you want to do something nice for her and get it cleaned so that it looks brand new again. This is a great way to be able to bring the ring with you if you do not now what size it is. At the jewelry store the employee helping you will probably use a ring sizer to tell what size it is.

Next, you need to know where to pick out the ring that you will be using to propose with. A jewelry store is where almost everyone goes to get this special ring because they offer many choices. The people who work at the jewelry store will also be able to re-size your ring right on site. There are other places you can get the ring such as a pawn shop. Pawn shops are a great place to go to get a Vintage Engagement Ring at great prices. The quality of the engagement ring will be the same as if you were to buy it from a jewelry store.

The last step in getting an Couple Wedding Band for your future wife is to pick out the location you are going to propose at. The location you propose at should be unique and special to you and your future wife. It could be where you first met, or a special place you two like to go all of the time. No matter where you chose try not to be nervous. It is a good idea to practice your proposal before you do it because you are less likely to be nervous when the day comes. Your future wife will not suspect a thing because you successfully got the ring without her knowing. In the end the two of you will live happily ever after.

SEO link building is the primary focus of off-page search engine optimization. It's a strategy used to increase the exposure of a website organically. Organic traffic, or unpaid traffic, is generated through popular search engines. Because of this business's target high traffic keywords to attract their ideal audience. The fist step in the search engine optimization process is to find these keywords and develop SEO articles around them. This portion of the SEO process is on-page optimization. After this is completed, it's time for SEO link building.

The Importance of Backlinks

To be clear, the primary goal of search engine optimization is to increase exposure of a website by ranking highly in search engines like Google. While writing SEO articles is the first step towards proper optimization, it's only half the battle. The other half is off-page SEO.

Even if you have the most well-constructed blog or website out there, it means nothing unless you have traffic. The best kind of traffic is sustained organic traffic. This can be achieved by consistently ranking high on search results pages. When Google is evaluating websites, they do more than just see if the keyword is mentioned a certain number of times. Google takes into account both the quantity of backlinks a website has, as well the quality of backlinks. Accumulating these links is the SEO link building process.

Using Article Directories

As I mentioned before, a website needs a few quality backlinks to rank. You can actually see how valuable backlink is by checking out the website's PR score.

There are a bunch of different article directories out there that are considered high PR backlinks. By becoming members of these article directories and posting content, you can help increase your websites organic traffic. Each time you publish content within one of these high PR directories you are allowed to include backlinks. Keep in mind that it is important that the content you post is of high quality. Typing a bunch of broken English and including backlinks won't help the SEO link building process.

Using Automated Tools

If you're new to internet marketing, it is important to know that there are tons of different useful tools and strategies out there. In fact, many of these tools and strategies, if used properly, can save you a lot of time and headaches during the SEO link building process.

Article submission services can be used to submit unique variations of your SEO articles to low PR websites. While these article directories don't carry as much clout as the high PR directories, they play an important role in Guest Posts Service. Some article marketing services can submit articles to thousands of websites with the click of a button. There is obviously some setup involved, but the initial time investment is worth every second. Can you imagine creating that many backinks on autopilot? Casino Guest Post Service tools can be incredibly potent.

It should be noted that you should be creating quality, relevant content that is useful to readers. In this way more people are likely to view, read and comment on your articles. They will also be more likely to visit your website or blog to seek more information that you have to offer. Now that you are familiar with Link Building Services, be sure to incorporate these strategies with on-page SEO techniques.

Merv Stevens works in Internet and Network Marketing. For tips and advice and to learn the most effective SEO link building strategies, go to his website: Wealth Success Ventures. Act now and discover how average people are achieving extraordinary results online by cashing in on the DIGITAL gold rush!

The lock feature of almost any item is highly important to keep its content secure. Be it for your house, your car, or even just your briefcase, locks are indispensable tools for security and protection. However, there are many instances when this protection can be compromised. Your lock can get broken, your keys may get lost, or you may forget a lock's number combination. While these are problems that you can try to fix yourself, there is no true need to do so, as there are many companies offering Locksmith San Antonio tx services that will do it for you. These are expert services that will provide surefire solutions to any of your lock problems.

Far-Reaching Services
Locksmith services can be rather diverse, as they offer different kinds of services depending on a customer's needs. Practically every sort of lock problem can be solved through calling a locksmith service provider. If you lose or break all your keys, a provider can pick your lock. They can also open your car trunk, start your car, or unlock your briefcase in the event of a lost key. Another service offered is the replacement of lost keys, which you can avail if you choose not to change your locks. Most providers can replace any type of key, so that is a bonus.

Locksmith service Anytime, Anywhere
Unfortunate events can happen to you anytime and anywhere. You can lose your car keys in the middle of nowhere or forget your briefcase key during an important out-of-town meeting. In both circumstances and other similar cases, a locksmith service provider can help you get out of the bind. Most providers are available for service regardless of your location, and all you need to do is call and wait for a locksmith to come to your place. Locksmiths can also be summoned anytime. Even during holidays or in the middle of the night, you can expect a locksmith service provider to attend to your immediate lock or key needs.

Convenience
Many refuse to call a locksmith service provider as they attempt to solve their own lock problems by themselves. While this may sometimes work, untrained individuals simply cannot compete with the services offered by professional locksmiths. As a matter of fact, handling a lock crisis on your own can have tragic consequences. Destroyed doors, ruined furnishings, and even physical injury may also result from not using a locksmith service provider. On the other hand, professional locksmith service allows the quick solution to any lock problem. With the help of an expert, unlocking your doors, changing your locks, or duplicating your keys will be a breeze. It is guaranteed that there will be no time wasted and definitely no doors broken.

Guaranteed Solution
A promise that only a Locksmith New Braunfels TX can give is the guaranteed solution to whatever lock problem you may have. As mentioned, the job is carried out by trained professionals who are all well-prepared to pick a lock or duplicate a key. Because of their extensive experience and intensive training, locksmiths from recognized service providers can bring you absolute solutions to all your lock problems.

If you want to maximize the value of your home, you'll find garage doors are an easy and affordable method to increase your home's curb appeal. A good garage door will distinguish it from the rest of the neighborhood. For something extra special, custom made garage doors can be designed to your specifications.

The most common types of garage doors are: Retractable, Canopy Side, and Hinged Sectional Retractable. Where limited space in your driveway is an issue, sectional garage doors are the right choice. They open and shut vertically, allowing cars to park very close to the door without keeping it from opening. Among the wide variety of designs, the most popular garage doors are sectional, upward acting, and self storing.

The Types of Garage Doors

Gone are the old manual doors. Today you'll find that remote controlled and motorized garage doors have produced a more usable garage. The most popular style is the overhead garage door.

The primary concern in planning your garage door is the material used. Selecting the best garage door materials for your needs will depend on a few things like the style of your home, and how warm you want your garage to be. There are 3 main materials for garage door construction: Wood, Steel and Fiberglass (GRP).

When you're planning to install a Garage door repairs Mcminnville, you must consider door type and materials. You can also incorporate into your plan such things as heated Garage door repairs Scappoose or unique window options.

The Most Popular Style is the Overhead Garage Door

Overhead Garage door repairs Camas WAare by far the most popular type of garage door available to homeowners. With automatic stop and begin features, people find overhead garage doors easy to use, with wonderful options and safety features.

Overhead garage doors work with a rolling system. The door rolls up and stores along the roof of the garage. Overhead door features to look for are that they are smooth, quiet and compact. Installing an overhead garage door is simple; do it yourself, or get help from the manufacturer. Popular garage door manufacturers include Garaga, Liftmaster, Raynor or DBCI.

Over the past 15 years, I have been involved in over 100 residential garage door injury cases and I am generally retained as the door expert almost equally by injury and defense. I provide an unbiased neutral assessment of every claim.

The following article is derived from various common conditions that have led to a claim. Reviewing some of the most recent resolved cases has prompted me to write this article in an attempt to provide some substantial information to others contemplating litigation. It is almost impossible to include every variation, nuance, or combination of events pertaining to garage door injuries in this short article. The cases discussed in this article are based upon multiple previous claims that are similar in nature. I am repeatedly contacted by attorneys describing the same kind of injuries involving garage doors. It is not unusual for my office to have multiple active claims with very similar circumstances. If you are an attorney considering taking a potential garage door injury case,

Garage Door injuries pertaining to rental properties:

Amputations of toes and fingers are probably the most common injury attributed to residential garage doors. It has been my experience as the retained door expert that the majority of cases that involve these types of door related amputations occur in rental properties.

Who is responsible? Why are there so many claims from rental properties?

The landlord has failed to inspect the overall condition of the rental property prior to or during tenancy.
The landlord does not know, or care about the condition of the garage door. Because the property was purchased to be torn down for future development, current circumstances have created development delays so the property was rented to a short term tenant.
The property was inherited from elderly relatives that formerly lived there. The new owners are not professional landlords, and never thought that any defects of the property existed or were important.
The door operator needed replacing, but the landlord did not want to spend the money or effort as the tenant was not using the garage to park cars, only store household goods.
The door does not have current compliant safety devices installed or appropriate hardware such as an exterior door handle to move the door up or down.
Improperly maintained or deferred maintenance because of cost.
Section 8 or low rent tenancy.
Tenants have inappropriately used the garage door or created damage to the door and opener.
Parental supervision of tenant children is lacking.
Tenant did not pay the electric bill and the automatic door opener cannot function.
The owner has hired a management company that is responsible for oversight and maintenance, and does not want to provide the appropriate maintenance due to cost.
A management company provides inappropriate repairs by unskilled and untrained workers.
Every Garage door repairs Mcminnville door must be properly balanced to operate safely
Many amputations of fingers and toes have occurred as a result of an improperly balanced Garage door repairs Camas WA. These cases are often the result of limited interaction with a seldom used sectional or single panel door. I have been retained on many cases where a tenant only used the door a couple of times prior to sustaining an injury, but had been living in the property for a few years.

We all know we ought to check our tires regularly, both for wear and tear, and the tire pressures, but do you really know what you are looking for? Your car tires are the only part of your car that is in contact with the road, so the way your car drives will depend a lot on the condition of your tires. The area of ??each tire that is actually in contact with the road surface is only about the size of a foot, so if you want to stop when you press your brake to the floor, you need that small area of ??tire to have sufficient tread and the right tire pressure to stop in adequate time. After all, under an emergency braking situation, it could save your life.

So you are ready to check your tyres. Here is a quick list of things you should be looking out for:

The tread wear indicator bar - this is a bar going across the treads that is only visible when the tires are wearing out. There will be a few of them in different places, and if your treads are at the same level as the indicator bars, you probably have only 2 millimeters of tread left. As the legal limit is 1.6 millimeters, this means it is time to book in for your tires to be replaced.

Tread depth - if you aren't sure about your indicator bars, or think you have been driving on them for a while and need to check if your tires are still legal, then you need to check your tread depth more accurately. Ideally you should use a tread depth gauge, as this will tell you exactly how much wear is left, but in a pinch you can use a 20 pence piece. Just push it in between the treads and if you can see the band around the outside, your tire needs replacing. Always check tread depth in a few places around the tyre.

Sidewall - it isn't just the surface of the tires you need to check, you should also check for any cracks or damage to the sidewalls. If you can see any grooves that shouldn't be there, your tire could be developing a leak. While this may just be a slow leak, it could blow out while you are driving, which is likely to cause an accident. Better to get your tires replaced before that happens.

Bulges - finally you should do an overall inspection of each tire. Anything unusual on the surface of the tire such as bulges are a sign that there is damage somewhere under the surface of the Puncture Repair Harlow. This one is urgent; if you find a bulge, get your Car service Harlow changed straight away.
You should aim to carry out this check at least every month, and it is also worth checking your car tires before any long journeys, particularly if you are going to be further from a garage than you usually are. The rest of the time, you can still keep an 'eye' on your Mot Harlow from inside the car - if you feel any excessive vibration, one possible cause is your tyres, so they should be the first thing you check. Even if something else is causing the vibration, if you don't rectify the problem sooner rather than later, your tires could end up paying the price of the uneven driving.

Every driver is aware that a vehicle has to be fitted with good quality tyres as a necessary precaution against safety according to the law. You may be tempted to hold on to your worn tyres a little longer just to save some money. However, just as you would change your faulty breaks that may let you down at an opportune moment, you cannot play around with worn tyres, as this component is one of the most important parts in a car. Tyres are the only component of the car that makes direct contact with the road. Therefore, one should ensure that tyres are always maintained in impeccable condition within the legal limits.

It does not necessarily stand to reason that expensive tyres are more roadworthy than cheaper ones. While we all know that we have to pay for quality we can also get good quality tyres for a lesser price if we spent time looking around. Not all of us are inclined to waste time shopping around trying to secure the best deal possible. There is an option available for all of us now!

Buy tyres online as this has become a popular trend. You can add value information, when you search online as you can see what the products on offer look like. Make comparative note of the prices, read the customer reviews and look for other vital details that you require. Most of these tyre retail outlets have a working support team, who will answer any or all of your queries either on the phone through emails or through the chat systems.

Can the tyres be fitted if you purchase them online? Yes, it is possible to get the same service that you would get from a retail outlet onshore. If you are not located too far away, you will find some retailer online, who has a garage facility in the area where you reside. You have the option of getting the Budget tyres fitted by the retailer of your choice in the area or have them delivered to your door, if you do not want the tyres to be delivered to the address of your fitter. You can take your car to the dealer and have the Suspension fitted there at no extra cost. Except for the tracking cost, all other things like the new valve disposal of the old casing wheel balance and VAT are normally included in the final price of fitting. You do not have to worry about payment as all these tyre retailers use secure payment methods that will not reveal your data.

You should make it a point to research a bit online before purchasing your Part worn tyres near me. It would be a good idea to subscribe to the newsletter or RSS feed of different retailers and be informed about the newest products available. You could spot good deals as well as make a quality purchase by scouring online, rather than trudging from shop to shop or going through the Yellow pages looking for deals.

See? Simple and effective and I haven't mentioned by product once which is the key to good sales. Don't mention your product at all until you have got the reader interested because they simply won't look at your mail.

But why? Well, a customer who is looking for new tyres will already know what they're after and they would have searched for it. By searching, they may find your garage or they may not but they are actively looking and therefore are a more fickle customer. They will try a number of tactics and a number of different garages to get their tyres.

We're not going after these people, we are going for those that don't even realise they need our service - we're going for the passive buyer which we will then convert into active.

OK, we've got the headline and hopefully it's piqued enough interest for people to want to read on, so what next? Well, you explain your proposition...

Are you storing up expensive garage bills?

During an economic downturn, many people quite rightly look to reduce their bills to save money. Whilst this can give short-term relief and help out now, by not regularly checking your car or servicing it, you may be storing up trouble for the future when your bills may multiply.

For example, a simple Welding check may highlight a problem than can be fixed quickly with a cheap tyre change. However, by ignoring the problem or not getting your tyres checked out, you may be on the receiving end of a fine if your car is stopped by the police.

Even worse, poorly maintained or worn Premium tyres can actually be extremely dangerous, especially in poor weather conditions. Are you happy to gamble with your life and those of others?

The fact is, you can get your tyres checked and replaced for a fraction of the cost of doing nothing if you act quickly.

Pop over to Bob's Garage where we'll check your Laser wheel alignment and put you on the right track to safer driving.

From the 1st November 2012 it will be a legal requirement for all new tires to feature one of the new tire labels as required by European Regulation No 1222/2009. The intention behind these labels is to give customers more information about the performance of each tire. It covers three areas - wet braking, which gives you a guide to how safe the tire is; rolling resistance, offering a guide to fuel consumption; and external noise. The labels are very similar to those found on household appliances such as washing machines, and should be easy to understand.

These new tire labels are likely to encourage consumers to put more thought into the tires they purchase, and tire manufacturers to put more effort into improving the performance of their product. In time this should improve the safety of our roads (by reducing stopping distances), reduce greenhouse gas emissions (by reducing fuel consumption), and reduce the noise that traffic produces. Overall this should result in a definite improvement of our environment.

The tires will be graded by each manufacturer or importer (where tires are coming in from outside the European Union) to a strict testing system, and each country will be responsible for ensuring that the testing is carried out to the correct standards. Tire manufacturers have already begun this process, so how are the tires tested for each aspect of the label?

Wet braking - this test involves using a real vehicle and a wet road. The temperature, state of the road surface, water depth and speed are all stipulated under European legislation, although they do vary for different types of tyres. For example, winter tires must be tested between 2 - 20 degrees Celsius, while summer tires are tested between 5 - 35 degrees Celsius. The water must be between 0.5 and 1.5 mm for all tyres, and the speed must be between 12 - 50 mph.

Fuel economy - by measuring the rolling resistance of the MOT near me under standardized conditions. The test does not require a vehicle, but instead simulates a vehicle driving at 50 mph with a load that is equivalent to 80% of the tire's load index. The lower the Brake disc' rolling resistance, the more fuel efficient they will be as they will use less energy as you drive.

External noise - tested with a microphone at the side of the track to record the sound as a vehicle drives past at 50 mph. Again, the track and the temperature are stipulated.
This is all useful information when you are choosing new car tires Full service, but there are other things you should be considering. The longevity of the Car service will naturally effect how much it costs you in the long run, while dry braking performance is as important as wet braking (more so if you find yourself needing to do an emergency stop on a dry road!). The handling performance is also important as the majority of our roads aren't straight!

If you haven't heard about the upcoming change to the tire labeling laws, then you obviously haven't been spending as much time reading and thinking about tires as I have! In November it will become mandatory for all car tires to feature a label detailing the tire's performance in three key areas; wet braking, fuel consumption and noise levels. The aim is that this information will enable consumers to make better choices when purchasing their tyres. Better choices will improve drivers' safety and also be good for the environment, and as consumers choose to buy better performing tyres, tire manufacturers will be forced to up their game and improve their tires still further.

These new tire labeling laws are likely to have a dramatic effect on the tire retail industry. As this is more than likely the biggest change in tire retailing over the last generation, it is only natural for manufacturers and retailers to wonder what the effects may be. With this change coming as we are still in a recession, it is even more important that retailers are able to properly prepare.

The current situation actually seems to be improving; while many tire retailers have been closing branches this year, these figures have dropped from the previous year when twenty times as many branches were closing among the top 20 tire retailers in the United Kingdom. In fact, many companies are reporting growth over the last year, with new tire fitting depots being added to networks across the country.

The biggest concern that Suspension retailers have is that consumers will be confused by these new labeling laws and that may affect their buying confidence. While Budget tyresare a distressed purchase (ie not generally something that you look forward to spending your money on), it is a worry that consumers may put off buying their new Part worn tyres near me until the last possible minute, which puts them at greater risk of experiencing an accident as their tires will not be performing as well as they should. One thing the retailers will be doing to try to combat this is having a lot of point of sale literature available to explain the labels to consumers. They will also need to accept that consumers may require a bit more time spent on explaining things to them when they are choosing their tires prior to fitting. In the long run, the extra effort should pay off, as better informed consumers make for an improved retail environment.

From the 30th May 2012 you may start to see the new labels appearing on your car tires, and from 1st November 2012, they will become a legal requirement on all tires sold in the European Union. Tire manufacturers have welcomed the new tire labeling laws as it will better inform tire consumers of three crucial performance characteristics. The new labels will give information about fuel consumption, wet braking and noise levels. Interestingly, tire manufacturers actually measure many more performance indicators than just the three on the labels - Dunlop track at least 50!

One area that concerns tire manufacturers is winter performance. Under the rules that will soon be followed, a strong winter tire could appear weaker than its summer competitors due to increased fuel consumption and noise. However, despite these values ??increasing, when braking in ice or snow, or climbing a steep hill in colder weather, the winter tires would outperform the summer tires dramatically. It has been proposed that a seasonal element be added to the labeling to cover this.

Another concern of the manufacturers is that noise rating isn't really that useful for consumers. The quality of road surfaces, certain aspects of civil engineering such as roadside fencing and tree planting, traffic volume, and vehicle manufacturing have a bigger effect on the noise of highways than tyres. Also, the decibel level is measured externally, and if your car is well sound-proofed, you probably won't notice much difference between loud or quiet tires. Low wet braking and fuel consumption levels are things that increase consumers' safety and save them money. What incentive is there to buy quiet tires? Budget tyres manufacturers already feel there is a chance the noise rating may simply be ignored by both manufacturers and consumers in favor of concentrating on wet braking and fuel consumption.Partworn Car suspension near me , it does diminish the effect of the new labels.

Whatever happens with regards to manufacturers' focus when designing new tires, it is reassuring to know that the tire labeling laws are already scheduled for review in 2016, so perhaps the noise rating will change to tread wear, which is already rated in America. Together with the wet braking and fuel consumption ratings, this would give consumers a rounded view of the car tires they are choosing to fit. Whatever the future brings, the tire labels promise to push tire manufacturers' to innovate for the benefit of consumers.