Author |
Message |
14/01/2020 17:37:17
|
robertbeyer (IV06650001)
Messages: 1
Location: Miami
Offline
|
To install the drum on Brother Printer, ensure that the machine is turned on. After this, you have to open the front cover and remove the toner cartridge along with the drum unit assembly from the machine. Now, you have to push down the green lock lever followed by taking out the cartridge. Further, you have to unpack the new drum unit and place the toner cartridge firmly into the new drum unit. Consecutively, you will hear a sound that signifies that the drum unit is placed properly. Afterward, you have to clean the corona wire inside the drum unit to install the toner cartridge and drum unit assembly back into the machine. With this, the process to install Brother Printer drum comes to an end.
|
Brother Control Center !! Wake up Brother Printer[/b] |
|
|
20/11/2020 18:09:56
|
Lewis-H (IV06991501)
Messages: 138
Offline
|
Make sure that the machine is turned on. ...
Open the front cover. ...
Take out the drum unit and toner cartridge assembly. ...
Push down the green lock lever and take the toner cartridge out of the drum unit.
Unpack the new drum unit.
Put the toner cartridge firmly into the new drum unit until you hear it lock into place.
|
|
|
22/12/2022 20:19:55
|
Seo Expret (IV07622401)
Messages: 504
Offline
|
To install the drum on Brother Printer, ensure that the machine is turned on.visit here
|
|
|
16/02/2023 16:14:28
|
Trole1952 (IV09658501)
Messages: 132
Offline
|
If not, don't worry. You can do it with the help of a manual guide. Yes, manually but it will be easier for you to set the drum correctly which makes your job easier. Here you can get cnc spare parts manufacturers and learn more new things about the machine problams. I am going to help you out here by explaining the steps involved in installing some important accessories like the drum, separator, carriage assembly, and toner parts.
|
|
|
27/02/2023 16:26:54
|
RoxieRoss (IV011088001)
Messages: 14
Offline
|
thanks
This message was edited 1 time. Last update was at 27/02/2023 16:27:14
|
|
|
12/10/2023 18:39:22
|
LarryBond (IV08180301)
Messages: 19
Offline
|
To install a drum on a Brother Printer, one can follow a straightforward process that typically involves opening the printer's front cover, carefully removing the old drum unit, and inserting the new drum unit in its place. After securing it properly, ensure that the front cover is closed. Some models may require specific instructions for initialization or reset, which can usually be found in the printer's manual or online support resources. It's also beneficial to consult the manufacturer's website or use a rugged tablet for convenient access to instructional videos and troubleshooting guides, making the installation process efficient and hassle-free.
|
|
|
|